Tile Installation and Repair
Floor Tile, Wall Tile and Tile Repair Done Right — From Subfloor to Grout Lines
Tile installation is one of the most detail-dependent trades in home renovation — the difference between a floor tile that holds up for decades and one that cracks or loosens within a year comes down to what happens before the first tile goes down. Renossance delivers professional tile installation and repair for homeowners across Trent Hills, Campbellford and surrounding communities, handling everything from kitchen floor tile and bathroom wall tile to large format tile and full tiling projects.
We work with ceramic and porcelain tile, natural stone tile and glass tile across floors, walls and wet areas — and we treat every tiling project with the same precision that goes into our renovation work. Proper subfloor preparation, correct thinset mortar coverage, consistent tile spacers and clean grout lines are the foundation of a tile install that stays put and looks right years down the road. Our general contractor team is insured and bonded, with 7+ years of hands-on experience across Campbellford, Hastings, Norwood and the wider Trent Hills region. Whether you need a new tile floor in a kitchen or bathroom, wall tile installation in a shower, or repair of loose tiles and damaged grout, we handle the full scope. Every project is assessed on-site so the approach is matched to your specific tile surface, layout and conditions.
Why Trent Hills Homeowners Choose Renossance for Tile Installation
Tile work looks simple from the outside — but a tiling project done without proper preparation, layout planning and technique is one of the more expensive renovation mistakes to fix. Loose tiles, uneven grout lines, lippage between large format tile pieces and cracked mortar beds are all signs of tile installation that skipped the fundamentals. Renossance brings experienced, methodical tile installation and repair to every project — where the layout is planned before a single tile is cut, the subfloor is assessed and levelled before anything is set and the finished result is built to last. We serve Trent Hills, Campbellford and the surrounding region with the same standard on every job.
Precision From Layout to Last Grout Line
We plan every tile layout before installation begins — setting chalk lines, accounting for tile size and layout patterns so cuts are symmetrical and the finished floor or wall looks intentional. Every tile is set with consistent spacers so grout lines stay straight and the tile surface sits flush throughout.
Local Knowledge, Right Prep Every Time
Homes across the Trent Hills area vary in age and subfloor construction — knowing what is underneath before you install tile is what prevents problems later. We assess each subfloor or wall substrate on-site and address floor levelling, waterproofing and structural concerns before the tile installation begins.
Insured, Bonded and Accountable
Renossance is fully insured and bonded on every tile installation and repair project. You get a clear scope before work begins and a crew that removes all excess grout and tile debris completely when the job is done.
What Professional Tile Installation Does for Your Home
A properly installed tile floor or wall tile surface does two things at once: it protects the substrate underneath from moisture and foot traffic, and it becomes one of the most visible finishes in the room. In a bathroom or kitchen, quality tile installation adds lasting value — a surface that holds up to daily use, stays waterproof where it needs to and still looks clean a decade in. Getting the right tile, set with the right mortar and finished with proper grouting, is what separates a tiling project that ages well from one that needs replacing in a few years.
Whether it is a full bathroom renovation, a new kitchen floor tile or wall tile installation in a shower or entryway, the result of professional tile work is a surface you do not have to think about — it just performs. Our approach to every tiling project is grounded in proper fundamentals: the subfloor is right, the mortar bed is right and the tile is set to last. Ready to discuss your tile installation or repair project? We are happy to walk through your space and talk through the options.
How We Handle Your Tile Installation Project
On-Site Assessment & Layout Planning
We start by reviewing the space — the subfloor or wall substrate, the square footage, existing conditions and your tile selection. We establish the layout using a chalk line to ensure the tile floor installation is centred, balanced and accounts for cuts at edges and transitions. Large format tile and complex layout patterns like a grid pattern or herringbone require this planning step to execute correctly.
Substrate Preparation & Floor Levelling
Before any tile goes down, the surface has to be right. We check the subfloor for flex, damage and levelness — and address floor levelling where needed so the mortar bed cures flat and tiles sit at a consistent height. For wet areas we apply a waterproof membrane to the shower or tub surround before tile installation begins.
Tile Setting — Mortar, Spacers & Cuts
We apply thinset mortar using a notched trowel, press each tile firmly and use tile spacers to maintain consistent gaps between the tiles throughout the floor or wall. We cut tile using a tile cutter for straight cuts and a tile nipper for curved cuts around fixtures and edges. The back of the tile is fully covered — no voids — so the bond is solid and the tile surface sits flat.
Grouting & Finishing
Once the mortar has cured, we apply grout using a grout float, working it into every gap between tiles and spacers. Excess grout is cleaned from the tile surface before it sets. Grout lines are finished consistently across the full installation — floor tile, wall tile and any transitions. Where required, caulk is applied at changes of plane rather than grout to allow for movement.
Final Inspection & Walkthrough
We inspect the completed tile installation for loose tiles, lippage, grout line consistency and overall finish before calling the job done. Any new tile or repaired section is tested for proper adhesion. We walk through the finished space with you and clean up completely before closing out.
Tile Installation & Repair Across Trent Hills and Campbellford
Renossance provides tile installation and repair throughout a 25–30km radius centred on Campbellford — covering Trent Hills and the communities that surround it. Whether you are in Havelock, Madoc, Marmora or closer to Campbellford itself, we bring the same on-site assessment process and installation standard to every address we serve. Local contractors working in the same region understand what is typical in the homes here — the subfloor construction, the older bathroom configurations, the moisture challenges in local builds — and that context makes for better tile work.
Not sure if your property falls within our service area? Give us a call at (705) 977-4453 and we will confirm right away. We actively serve all eight of our listed communities and are happy to discuss your tiling project before you commit to anything.
Renossance Process
Rough Estimate
A preliminary estimate based on your project details before an onsite visit.
Onsite Visit & Formal Quote
We review the space in person and provide a clear, detailed quote.
Project Planning & Deposit
A 1/3 deposit secures your project and puts you on our schedule.
Work Begins
The second 1/3 payment is due when work starts on site.
Final Inspection & Completion
We review the finished work together and collect the remaining balance.
Frequently Asked Questions (FAQs)
Your questions answered. Everything you need to know about tile installation and repair
What Types Of Tile Do You Install?
We install ceramic and porcelain tile, natural stone tile, glass tile and large format tile across floors and walls. The right type of tile depends on the location — floor tile needs to handle foot traffic and moisture, while wall tile installation in a shower or wet area requires proper waterproofing behind it. We will help you understand what works best for your specific space and use.
How Do You Prepare The Subfloor Before Installing Tile?
Subfloor preparation is the most critical step in any floor tile installation. We check for flex, damage and levelness — flex in a subfloor causes tile and grout to crack over time regardless of how well the tile is set. Where floor levelling is needed we address it before any mortar or tile goes down, so the finished tile floor installation is built on a solid, stable base.
Can You Repair Loose Or Cracked Tiles Without Replacing The Whole Floor?
In many cases, yes. Loose tiles that have not yet cracked can often be re-set by removing the tile cleanly, scraping the old mortar and re-adhering with fresh thinset. Cracked tile or damaged grout lines in an isolated area can be repaired without disturbing the surrounding tile surface. We assess on-site to determine whether repair or full replacement is the right call for your situation.
How Long Does A Tile Installation Project Take?
A standard bathroom floor tile or wall tile installation typically takes one to two days of active work, plus cure time for the mortar before grouting begins. Larger tiling projects — a full bathroom renovation, a kitchen floor tile install or multi-room floor tile installation — will take longer depending on square footage and layout complexity. We provide a realistic timeline during the initial consultation.
What Is The Difference Between Ceramic And Porcelain Tile?
Ceramic tile is fired at lower temperatures and is slightly more porous — it is a practical, cost-effective choice for wall tile installation and lower-traffic floor areas. Porcelain tile is denser, harder and more water-resistant, making it better suited for high foot traffic floors and wet areas like showers. Both ceramic and porcelain are materials we work with regularly and we will help you choose the right tile for the location and use.
